|
DIMENSIONAL DATA |
Gauge Isolators
FEATURES:
- Protects and isolates pressure sensing
instruments
- Total isolation from system media
- Low profile design eliminates dead
volume
- Convoluted diaphragm allows accurate
transmission of system pressure
- Optimum pressure containment spherical design
- Low in original cost and maintenance
- Simple installation
SCOPE:
- The Gauge Isolator provides two fluid chambers
separated by an impermeable membrane. The upper chamber (instrument side)
is normally filled with a stabilized liquid. The lower chamber receives
the media under pressure.
- Most pressure sensing devices are compatible
with 1/4" FNPT outlet. The inlet is standard 1/2" FNPT or 1/4" FNPT.
- Chemical resistance and purity levels are as
recommended for the base materials.
- No metals or lubricants are used in
construction, internally or externally.
- Custom membranes may be supplied upon request.
MATERIALS OF CONSTRUCTION:
|
BODY |
MEMBRANE |
|
PVC:
Polyvinyl Chloride |
Standard: PTFE, Teflon®, also available in: |
|
CPVC:
Chlorinated Polyvinyl Chloride |
FPM:
Viton®, Fluorine elastomer |
|
PP:
Polypropylene, homopolymer, glass and mineral reinforced |
EPDM:
Ethylene Propylene elastomer |
|
|
MILLAR-WILLIAMS HYDRONICS LTD.
4060 Fairview St., Unit 12, Burlington, Ontario
L7L 4Y8
Burlington Tel: (905) 637 9496 Toronto (416) 868
1550
CANADA TOLL FREE 1-800-263-6651 FAX (905) 333 5446 |
