| Drum Pumps | Sealless Pumps | Plastic Pumps | Vertical Pumps | Conveyor Systems |     |Pipeline Specialties | Filter Systems | Gauge Isolators | Electric Heaters | Ball Valves |

 

 

Engineering Specs

CHEM-GARD CG

CHEM-GARDŽ CGA

CHEM-GARDŽ CGM

CHEM-GARDŽ CGC

CHEM-GARDŽ PG

CHEM-GARDŽ CGV

 

HOME
 CONTACT US
 CLIENTS
 ABOUT US

CHEM-GARDŽ CG

Thermoplastic Centrifugal Pumps

PVC POLYPROPYLENE PVDF ECTFE
5 to 1450 gpm Heads to 400 feet
Temperatures to 275°F

CHEM-GARDŽ thermoplastic heavy duty pumps are designed and constructed to maximize the unique properties of solid homogenous chemically inert thermoplastics. They are not plastic lined metal pumps nor metal pump designs made with plastic components.  They have been engineered to efficiently and reliably transfer corrosive, abrasive and other aggressive fluids, as well as deionized and ultrapure water, pharmaceuticals, reagent grade chemicals and similar liquids which must remain free from metallic contamination. To assure no metal-to-fluid contact, shafting is sleeved in thermoplastics and mechanical seals are reverse mounted.


Rugged homogeneous thermoplastic pump components assure dependable performance


SPECIFICATIONS

  1. Pump Casing and Cover: Molded from virgin, homogeneous thermoplastics.
  2. Impeller: Dynamically balanced, molded from virgin, homogeneous material, with an imbedded, stainless steel insert. Key driven to assure positive drive.
  3. Drive Pedestal With Retractable Front Bearing: Designed to provide a wide open seal area. This simplifies inspection, assures minimum shaft overhang and deflection, and reduces maintenance.
  4. Shaft: Stainless steel large diameter shaft with wetted end completely sleeved with thermoplastic to isolate it from the fluid.
  5. Mechanical Seals: The pumps are designed to permit the use of all standard single and double mechanical seals without pump modification. The seals are reverse mounted with the nonmetallic seal component inboard to avoid any metal-to-fluid contact and to make it unnecessary to utilize high alloy or exotic metal seal components.
  6. External Cast Iron Armor: Completely painted with 2-part epoxy chemically resistant coatings for protection against atmospheric corrosion.

PERFORMANCE CHARACTERISTICS - 60 Hz
50 Hz curves available upon request

NOMINAL DIMENSIONS (Inches)
MODELS OVERALL
LENGTH		 HEIGHT WIDTH SUCTION/
DISCHARGE
CG 200 21 10 3/4 9 1 x 1
CG 300 23 1/2 11 1/2 10 1 1/2 x 1 1/2
CG 500 23 1/2 11 1/2 10 2 x 1 1/2
CG 800 23 1/2 11 1/2 10 2 x 1 1/2
CG 1200 25 13 3/4 12 3/4 3 x 2
CG 1800 25 13 3/4 12 3/4 4 x 3
CG 2400 32 23 22 6 x 4
  • Dimensions and specifications subject to change.
  • Catalog sheets are available on all models including ANSI designs, self priming, vortex, magnetic drive and close coupled pumps.

HOME
 CONTACT US
 CLIENTS
 ABOUT US

 

MILLAR-WILLIAMS HYDRONICS LTD.
 4060 Fairview St., Unit 12, Burlington, Ontario   L7L 4Y8
 Burlington Tel: (905) 637 9496 Toronto (416) 868 1550
CANADA TOLL FREE 1-800-263-6651  FAX (905) 333 5446