| Drum Pumps | Sealless Pumps | Plastic Pumps | Vertical Pumps | Conveyor Systems |     |Pipeline Specialties | Filter Systems | Gauge Isolators | Electric Heaters | Ball Valves |

HOME
CONTACT US
 CLIENTS
 ABOUT US

 Belt-Drive Conveyor

Custom Configured
 Conveyors can be custom configured to fit almost any requirement.

Depending on the model, choose from gas, electric, PTO, hydraulic or gas/hydraulic combo drives. The unique S Drive can be mounted almost anywhere along the tube - at the lower end to accommodate PTO drive, or higher on the tube for other drives to allow longer reach into bins. An electric top drive is also available for models under 45 feet. An optional integral swing hopper or portable transfer adds versatility as does the optional self propelled kit. Most models are in corrosion resistant stainless steel to accommodate bulk material handling.
Advanced custom belt conveyor configurations can be accommodated.

 
 

            Built for Performance.   Built for Safety.   Built to be Gentle.

SPECIFICATIONS

1300 SERIES CONVEYORS
MODEL A UP B UP A DOWN B DOWN WIDTH HP ELEC HP GAS HYD. (Cu. In.)
1310 4.5' 5' 4.5' 5' 3.5' 3 H.P. 5.5 H.P. 4.5 (H. Series)
1314 LP 3' 6' 3' 6' 3.5' 5 H.P. 6.5 H.P. 4.5 (H. Series)
1335 16' 17' 7' 18' 8' 5 H.P. 20 H.P. 6.2 (2000 Series)
1345 21' 22' 10.5' 23' 8' 5 H.P. 20 H.P. 6.2 (2000 Series)
1355 26' 27' 11.5' 28' 10' 7.5 H.P. 24 H.P. 14.9 (2000 Series)
1365 31' 30' 12.5' 32.5' 11.5' 10 H.P. 24 H.P. 14.9 (2000 Series)
1375 36' 33' 12.5' 35.5' 11.5' 15 H.P. 24 H.P. 14.9 (2000 Series)
1385 41' 36' 12.5' 39' 11.5' 15 H.P. 24 H.P. 14.9 (2000 Series)

1500 SERIES CONVEYORS
MODEL A UP B UP A DOWN B DOWN WIDTH HP ELEC HP GAS HYD. (Cu. In.)
1535 16' 17' 7' 18' 8' 7.5 H.P. 20 H.P. 14.9 (2000 Series)
1545 21' 22' 10.5' 23' 8' 7.5 H.P. 20 H.P. 14.9 (2000 Series)
1555 26' 27' 11.5' 28' 10' 10 H.P. 24 H.P. 14.9 (2000 Series)
1565 31' 30' 12.5' 32.5' 11.5' 15 H.P. 24 H.P. Call for requirements
1535 16' 17' 7' 18' 8' 7.5 H.P. 20 H.P. Call for requirements
1535 16' 17' 7' 18' 8' 7.5 H.P. 20 H.P. Call for requirements


1800 SERIES CONVEYORS
MODEL A UP B UP A DOWN B DOWN WIDTH HP ELEC HP GAS HYD. (Cu. In.)
1814 LP 3' 6' 3' 6' 3.5' 7.5 H.P. 9 H.P. 6.2 (2000 Series)
1835 16' 17' 7' 18' 8' 10 H.P. N/A 14.9 (2000 Series)
1845 21' 22' 10' 23' 8' 10 H.P. N/A 14.9 (2000 Series)
1855 26' 27' 11' 28' 10' 15 H.P. N/A 14.9 (2000 Series)


2000 SERIES CONVEYORS
MODEL A UP B UP A DOWN B DOWN WIDTH HP ELEC
2035 16' 17' 7' 18' 8' 10 H.P.
2045 21' 22' 10' 23' 8' 15 H.P.
2055 26' 27' 11' 28' 10' 20 H.P.
2065 31' 22' 12' 26' 12' 25 H.P.
2075 36' 28' 12' 33' 12' 25 H.P.
2085 41' 33' 12' 39' 12' 30 H.P.
2095 46' 36' 14' 44' 12' 40 H.P.
20100 49' 38' 14.5' 46' 12' 40 H.P.

'A UP' is conveyor discharge height (from bottom of discharge hood).
'A DOWN' is overall conveyor height (from top of discharge hood)

NOTE:
1) Hydraulic Systems: H Series requires 12-16 gal./min.; 2000   series requires 16-20 gal./min.

2) 1314 L.P. - 6 1/2 H.P. Honda c/w 6:1 gear reduction or 9 H.P.,  no gear reduction.

3) Requirements may vary for some hydraulic systems. Contact Millar-Williams for specific requirements.

4) Custom under bin systems and stationary conveyors are also available in 8", 10" and 14" diameter tubes.

MILLAR-WILLIAMS HYDRONICS LTD.
 4060 Fairview St., Unit 12, Burlington, Ontario   L7L 4Y8
 Burlington Tel: (905) 637 9496 Toronto (416) 868 1550
CANADA TOLL FREE 1-800-263-6651  FAX (905) 333 5446